Thread: rpm
View Single Post
  #2 (permalink)  
Old 10-22-2009, 09:47 PM
highlander highlander is offline
Junior Member
 
Member #12
Join Date: Jan 2009
Posts: 8
highlander is on a distinguished road
Activity Longevity
0/20 20/20
Today Posts
ssssssss8
View highlander's Photo Gallery(0)
Default    This Should be News!  Tag it for UTVBlog!  

My 2009 XTZ started loosing power. It got so bad that in high I thought I would have to push. It had plenty of power until you pushed about 3 in on the throttle and then nothing. We rode it down the highway and it quit pulling around 5000RPM in high

Here is what my dealer found.
1. In nuetral it is suppose to start cutting out at 4500RPm (to keep from blowing motor) Mine was fine
2. AC said that it sounded like the ECU thought it was in nuetral. To check the following. Check the wire that goes from the shifter to the ecu could be loose or broke. (Mine was fine.)
3. If it was not the wire then it had to be the ECU. They sent him a new one installed itand back to full power.

Also have you checked the prefilter behind the drivers seat. Just a thought

Hope this helps
Reply With Quote