[spdjnky_42]

I know this has probably been beat to death. Just purchased a 2008 650 Prowler. Im looking for more light. Superbrightleds has a 30" light bar that is 11,000w (combo flood/spot light) lumens. It runs on 90w. Do I use something like this, alone. Or do I run stock lights and a small 50w light bar, for more light?

Also is the 650 Xt considered the 700? I dont see a topic page for the 650 here

 

[Diesel Racer]

The 4 or 6 led 3" cubes are plenty of light, the stators in these buggy's won't handle the power load unless you have a second battery and / or alternator.

 

[dpdavidson02]

I went with the superbrite LED headlight conversion on mine. They provided more light than needed!

 

[Diesel Racer]

RD,

I have the same ones in mine also but the beam is kind of funky, just haven't had the time to adjust it.

 

[dpdavidson02]

I originally put all 4 in, and after the first night ride I removed 2!

 

[Diesel Racer]

Did you keep the hi or low LED ?

 

[ArcticFrost]

I got a pair of HIDs and put them in the high beam on our XTX and they put out a lot of light! I also have HIDs in low and high beam on my atv. So I haven't gotten a LED light bar. I got the 35W 5k kit for 880 bulb type from ddmtuning.com


Sent from my iPhone using Tapatalk

 

[Diesel Racer]

I switched to led from HID due to the fact that the HID current draw was twice that of the factory halogen.

 

[dpdavidson02]

Same here on the HID's. I use the superbrites in the low beam only. Thinking about putting them back up on the front cage for the hi beam setting.