Arctic Cat Prowler Forum banner

2010 prowler xtx turf saver delete

1609 Views 3 Replies 2 Participants Last post by  dpdavidson02
Have a 2010 prowler xtx im trying to do a turf saver delete. installed new diff from 2009 xt and got axles off ebay also for xt. Everything fit ok, but after driving 4 miles one of the axles popped out of diff. Removed axle and found it is about a 1/2 inch shorter than stock. New axle is 26 inches or 660mm. Old stock shaft is 26 1/2 inches. All shafts i find on ebay for xt is 660mm. Not sure what to do at this point !!!
1 - 4 of 4 Posts
Check for a 2012 XTX on up axle, they have the right spline for your upgrade.
If you opt to go with factory axles, look for the newer "White Collar" type. They use a ball detent retaining clip.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.