[Gofast67]

Hello, i have a 650 prowler with a new starter, new solenoid and new key switch. All this was replaced because i couldn't get the starter to stop turning over. I still have same issue with new parts and when i turn on with new key switch i get nothing. When i use old key switch it will turn over, but won't quit when i let go of key. I can also unplug the key switch and it will continue to turn over. Please help

 

[dpdavidson02]

Check to see if the solenoid control wires are grounded out, or have a constant 12 volts to them. I think they are powered through a relay in the fuse box.

 

[Gofast67]

Ok i will ck that.