Arctic Cat Prowler Forum banner
1 - 7 of 7 Posts

· Registered
Joined
·
15 Posts
Discussion Starter · #1 ·
heres good one for you guys . i ve put in the rear seat , cage ,ice chest rack and all the crap in my XTZ and now even with my rear shocks cranked up , im still sitting to low in the rear . im thinkin about respringing the rear shocks ?
i talked with a shop in mesa and he said stuff in 16'' 500lbs. seems a lil high to me ,and FOX , and WALKER EVANS,... but nobody knows the factory lbs rating is one the springs? has anybody out there run into this ? oh ya and the stocker are only 15''
 

· Registered
Joined
·
63 Posts
I believe Mike @ Prestige Motorsports (prestigemotorsportsonline.com) said the factory XTZ rear springs are supposed to be rated at 250lbs each, but they tested at only 211 or so lbs. Mike sells some Eibach replacement springs that are rated @ 350lbs. Everyone that has tried them likes them. There is also another post about some other springs that work on the other Prowler site.
 

· Registered
Joined
·
15 Posts
Discussion Starter · #7 ·
lol wow this was a old post ! ya the cure was 350lbs springs . we had the stock XTZ springs tested and they are supposed to be 250lbs but none that i had a or anybody i know had them check out over 215lbs . ive since install a long travel with Fox shocks . and life is good .
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top